Home>>Top

The hottest section line in SolidWorks

2022-10-03

Detail

About the section line in SolidWorks

the definition of the section line type of SolidWorks is the same as that of AutoCAD. It uses the section line definition method of AutoCAD, which is common with AutoCAD Therefore, the section line can be defined

method: modify solidworkslangchinese-simplifiedn

open the file with a notebook and add the required line shape Such as

;; Based on AutoCAD Ver. 1 is 3.0's hatch pattern file

;;;; SolidWorks area hatch definition file:

* metal, (iron brickstone), ANSI iron, brick, stone masonry

45, 0,0, 0 125

* plastic, (lead zinc mg), ANSI lead, zinc, magnesium, sound/heat/elec in. The most typical data processing points are as follows: sulation

45, 0,0, 0 125

135, 0,0, 0,. 125

* glass, AR- GLASS@1.0

45,0,0,0.5, 0.5, -0.5

45,0,0 the instrument will record the maximum force value of the breaking specimen and the elongation of the specimen or the force value and deformation curve in the tensile process, 0,0.5, 0.3,-0.7

45,0., 0, 0,0.5, 0.3, -0.7

* cork, cork material@1.0

0, 0,0, 0,. 125

135, . 0625,-. 0625, 0,., .,-.

135, . 09375,-. 0625, 0,., .,-.

135, . 125,-. 0625, 0,., .,-.

* none

deleting unnecessary definition types can greatly improve the startup speed of SolidWorks